ENGLISH 19
C
C
1Always turn razor OFF, unplug from outlet and remove power cord from razor.
2Press the Razor Head Release Button to open the Razor Head Assembly.
3Clean inside razor heads and hair chamber by running under hot water.
C4 Clean outside of Razor Head Assembly by running under hot water.
5Close the Razor Head Assembly and shake off excess water.
Be careful not to hit the shaving unit against anything while shaking off excess water.
6Open Razor Head Assembly again and leave open to air dry.
NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads.
◗If you used foam or gel to shave, make sure to rinse all of it off to prevent residue