C
C
C
ENGLISH 21
5Remove and clean one set of cutters and combs at a time.
6Separate the cutter from the comb and clean it with the short bristled side of the brush supplied.
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.
7Clean the inside and outside of the comb with the brush supplied.
C |
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Shaving Head Cleaning Spray, Model HQ110 or alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.
8Replace the set back into the Razor Head Assembly.
Make sure that the two pointy edges of the head fit exactly into the recesses.
9Repeat the process for the other two sets of cutters and combs.