Operating Specifications, Special Notices

Performance Data Sheet

Water by Culligan Filtration System

FXRC Cartridge

Health Claim Performance Certified by NSF/ANSI* (100% safety factors built in for unmetered usage)

Standard No. 42: Aesthetic Effects

Parameter	USEPA	Influent	Effluent		% Reduction
	MCL	Challenge	Average	Maximum	Average	Minimum
Chlorine	—	2.06 ppm	0.14 ppm	0.3 ppm	93	85
T & O	—	—	—	—	—	—
Particulate**	—	3,100,064	519	2,425	99.98	99.92

		Standard No. 53: Health Effects
Parameter	USEPA	Influent	Effluent		% Reduction
	MCL	Challenge	Average	Maximum	Average	Minimum
Turbidity	1 NTU***	23.25 NTU	0.10 NTU	0.17 NTU	99.6	99.3

Cysts	99.95% Reduction	494,169	92	179	99.98	99.96

Lead at pH 6.5	15 ppb	157 ppb	3 ppb	3 ppb	>98	>98

Lead at pH 8.5	15 ppb	162 ppb	3 ppb	3 ppb	>98	>98

*Tested using a flow rate of 0.5 gpm; pressure of 60 psig; pH of 7.5 ± 0.5; temp. of 20° ± 2.5°C

**Measurement in Particles/ml

***NTU=Nephelometric Turbidity units

Operating Specifications

■Capacity: certified for up to 200 gallons (757 l)

■Pressure requirement: 40–120 psi (2.8–8.2 bar), non-shock

■Temperature: 33°–100° F (0.6°–38° C)

■Flow rate: 0.5 gpm (1.9 lpm)

General Installation/Operation/Maintenance Requirements

■Flush new cartridge at full flow for 60 seconds to purge out trapped air.

■Replace cartridge when flow becomes too slow; at least every six months.

Special Notices

■Installation instructions; parts and service availability; and standard warranty are included with the product when shipped.

■This drinking water system must be maintained according to manufacturer’s instructions, including replacement of filter cartridges.

■Do not use where the water is microbiologically unsafe, or with waters of unknown quality without adequate disinfection before or after the system; system may be used on disinfected water that may contain filterable cysts.

■The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.

■Check for compliance with the state and local laws and regulations.

NSF International Standards

Standard No. 42: Aesthetic Effects	Standard No. 53: Health Effects
Chemical Unit	Chemical Reduction Unit
Taste and Odor Reduction	Lead Reduction
Chlorine Reduction, Class I	Mechanical Filtration Unit
Mechanical Filtration Unit	Cyst Reduction
Particulate Reduction, Class I	Turbidity Reduction

The Water by Culligan Filtration System and FXRC cartridge have been tested and Certified by NSF only for the functions listed immediately above.

Made by: Culligan International, Westmont, IL 60559, Tel: (630) 654-4000

General Electric, Appliance Park, Louisville, KY 40225

NSF®

Tested & Certified

to ANSI/NSF

Standards 42 & 53

16207744P008 specifications

The GE 16207744P008 is a prominent piece of innovative engineering, specifically designed to cater to various operational needs in industrial applications. This product is renowned for its precision, reliability, and cutting-edge technologies that enhance the performance and efficiency of systems it integrates with.

One of the main features of the GE 16207744P008 is its robust design, which ensures longevity and lower maintenance costs. It is manufactured using high-quality materials that can withstand challenging environments, making it suitable for various industrial settings, including energy generation, manufacturing, and transportation.

The GE 16207744P008 is equipped with advanced sensor technology which allows for real-time monitoring of operational parameters. This feature is crucial for optimizing performance and ensuring that systems operate within desired thresholds. The integrated sensors can significantly reduce the risk of overheating or failure, delivering peace of mind to operators.

Another standout characteristic of the GE 16207744P008 is its compatibility with a wide array of systems and equipment. This adaptability makes it an ideal choice for organizations looking to upgrade or replace components without overhauling entire systems. Its modularity supports various configurations, allowing companies to tailor solutions to their specific operational requirements.

In addition to its physical attributes, the GE 16207744P008 incorporates sophisticated software capabilities. These software features enable advanced diagnostics and predictive maintenance schedules, ensuring that potential issues are identified and addressed before they escalate. This proactive approach not only contributes to improved efficiency but also extends the lifespan of the equipment.

The energy efficiency of the GE 16207744P008 is another critical characteristic, as it aids organizations in reducing their operational costs. By optimizing energy consumption, the component contributes to more sustainable practices, aligning with the increasing emphasis on environmental responsibility in modern industrial operations.

Overall, the GE 16207744P008 represents a fusion of robustness, adaptability, and technology, making it an essential asset for any industrial environment. Its ability to enhance performance while minimizing downtime and maintenance solidifies its position as a preferred choice among engineers and operators alike. With the GE 16207744P008, organizations can leverage the latest advancements in industrial technology to stay ahead in a competitive landscape.

GE 16207744P008 Operating Specifications, General Installation/Operation/Maintenance Requirements

Models: 16207744P008

MCL