Replacing the light bulbs.

Turning the control to the (off) position does not remove power to the light circuit.

Fresh Food Compartment—Upper Light

1

Unplug the refrigerator.

After replacing with an appliance bulb of the

Pull off the temperature control knobs.

same or lower wattage, reinstall the light shield,

 

2

replace temperature control knobs and plug the

 

Pull bottom of light shield down and

refrigerator back in.

3

forward, then rotate the top up and off.

 

 

 

Safety Instructions Operating

Fresh Food Compartment—Lower Light

This light is located either behind the top drawer or right above the top drawer (depending on your model).

1 Unplug the refrigerator.

2 If the light is behind the top drawer you will need to remove the drawer and the shelf above it. See the About storage drawer removal and About the refrigerator shelves and bins sections.

3 Grasp the bottom of the light shield and pull it forward and up.

(on some models)

After replacing with an appliance bulb of the same or lower wattage, replace the shield. If the light was behind the top drawer, you will need to replace the drawer and the shelf above it. Plug the refrigerator back in.

Instructions Installation

Freezer Compartment

1

2

3

Unplug the refrigerator.

Remove the shelf just below light shield. (The shelf will be easier to remove if it is emptied first.)

Pull the light shield toward you to reach the bulb.

After replacing with an appliance bulb of the same or lower wattage, reinstall the shield and shelf and plug the refrigerator back in.

Instructions Troubleshooting Tips

Customer Service

13

Page 13
Image 13
GE 16207744P008 Replacing the light bulbs, Instructions Installation, Safety Instructions Operating, Freezer Compartment

16207744P008 specifications

The GE 16207744P008 is a prominent piece of innovative engineering, specifically designed to cater to various operational needs in industrial applications. This product is renowned for its precision, reliability, and cutting-edge technologies that enhance the performance and efficiency of systems it integrates with.

One of the main features of the GE 16207744P008 is its robust design, which ensures longevity and lower maintenance costs. It is manufactured using high-quality materials that can withstand challenging environments, making it suitable for various industrial settings, including energy generation, manufacturing, and transportation.

The GE 16207744P008 is equipped with advanced sensor technology which allows for real-time monitoring of operational parameters. This feature is crucial for optimizing performance and ensuring that systems operate within desired thresholds. The integrated sensors can significantly reduce the risk of overheating or failure, delivering peace of mind to operators.

Another standout characteristic of the GE 16207744P008 is its compatibility with a wide array of systems and equipment. This adaptability makes it an ideal choice for organizations looking to upgrade or replace components without overhauling entire systems. Its modularity supports various configurations, allowing companies to tailor solutions to their specific operational requirements.

In addition to its physical attributes, the GE 16207744P008 incorporates sophisticated software capabilities. These software features enable advanced diagnostics and predictive maintenance schedules, ensuring that potential issues are identified and addressed before they escalate. This proactive approach not only contributes to improved efficiency but also extends the lifespan of the equipment.

The energy efficiency of the GE 16207744P008 is another critical characteristic, as it aids organizations in reducing their operational costs. By optimizing energy consumption, the component contributes to more sustainable practices, aligning with the increasing emphasis on environmental responsibility in modern industrial operations.

Overall, the GE 16207744P008 represents a fusion of robustness, adaptability, and technology, making it an essential asset for any industrial environment. Its ability to enhance performance while minimizing downtime and maintenance solidifies its position as a preferred choice among engineers and operators alike. With the GE 16207744P008, organizations can leverage the latest advancements in industrial technology to stay ahead in a competitive landscape.