About storage drawer removal.

Not all features are on all models.

Safety

Drawer

Guides

Left Side

When replacing the drawers, make sure you slide them through the drawer guides on the left side.

Drawer Removal

Drawers can easily be removed by tilting up slightly and pulling past stop location.

On some models you may need to remove the door bins from the fresh food door before removing the drawers.

If the door prevents you from taking out the drawers, the refrigerator will need to be rolled forward until the door opens enough to slide the drawers out. In some cases when you roll the refrigerator out you will need to move the refrigerator to the left as you roll it out.

Instructions Operating

About the automatic icemaker.

A newly-installed refrigerator may take 8 to 12 hours to begin making ice.

Instructions

 

Feeler arm

Icemaker

in the STOP

(up) position

 

Ice Storage Bin

Feeler arm in the ON (down) position

Automatic Icemaker (on some models)

The icemaker will produce eight cubes per cycle—approximately 120 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the icemaker, keep the feeler arm in the STOP (up) position.

When the refrigerator has been connected to the water supply, move the feeler arm to the ON (down) position.

The icemaker will fill with water when it cools to freezing. A newly-installed refrigerator may take 8 to 12 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the swing of the feeler arm.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy and taste stale.

Raise the access door to reach the icemaker bin.

Installation Instructions Troubleshooting Tips

Customer

Icemaker Accessory Kit

If your refrigerator did not come already

Check the back of the refrigerator for

equipped with an automatic icemaker,

the specific icemaker kit needed for

an icemaker accessory kit is available at

your model.

extra cost.

 

9

Service

Page 9
Image 9
GE 16207744P008 About storage drawer removal, About the automatic icemaker, Safety, Instructions Operating, Service

16207744P008 specifications

The GE 16207744P008 is a prominent piece of innovative engineering, specifically designed to cater to various operational needs in industrial applications. This product is renowned for its precision, reliability, and cutting-edge technologies that enhance the performance and efficiency of systems it integrates with.

One of the main features of the GE 16207744P008 is its robust design, which ensures longevity and lower maintenance costs. It is manufactured using high-quality materials that can withstand challenging environments, making it suitable for various industrial settings, including energy generation, manufacturing, and transportation.

The GE 16207744P008 is equipped with advanced sensor technology which allows for real-time monitoring of operational parameters. This feature is crucial for optimizing performance and ensuring that systems operate within desired thresholds. The integrated sensors can significantly reduce the risk of overheating or failure, delivering peace of mind to operators.

Another standout characteristic of the GE 16207744P008 is its compatibility with a wide array of systems and equipment. This adaptability makes it an ideal choice for organizations looking to upgrade or replace components without overhauling entire systems. Its modularity supports various configurations, allowing companies to tailor solutions to their specific operational requirements.

In addition to its physical attributes, the GE 16207744P008 incorporates sophisticated software capabilities. These software features enable advanced diagnostics and predictive maintenance schedules, ensuring that potential issues are identified and addressed before they escalate. This proactive approach not only contributes to improved efficiency but also extends the lifespan of the equipment.

The energy efficiency of the GE 16207744P008 is another critical characteristic, as it aids organizations in reducing their operational costs. By optimizing energy consumption, the component contributes to more sustainable practices, aligning with the increasing emphasis on environmental responsibility in modern industrial operations.

Overall, the GE 16207744P008 represents a fusion of robustness, adaptability, and technology, making it an essential asset for any industrial environment. Its ability to enhance performance while minimizing downtime and maintenance solidifies its position as a preferred choice among engineers and operators alike. With the GE 16207744P008, organizations can leverage the latest advancements in industrial technology to stay ahead in a competitive landscape.