Manuals / GE / Kitchen Appliance / Ice Maker

GE 16207744P008 owner manual Operating, Tips, Instructions Installation

Models: 16207744P008

1 76
Download 76 pages 23.16 Kb
Page 17
Image 17

Connect the Tubing to the Refrigerator

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

One of the illustrations below will look like the connection on your refrigerator.

Safety Instructions

We recommend installing a water filter if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator.

1 Remove the plastic flexible cap from the water valve (refrigerator connection).

2 Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

3 Insert the end of the copper tubing into the water valve refrigerator connection as far as possible. While holding the tubing, tighten the

1/4″ Copper

Tubing

Remove screws and fold back access cover.

OR

Tubing Clamp

1/4″ Compression Nut

Ferrule

(sleeve)

Refrigerator

Connection

Operating

fitting.

4 Fasten the copper tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Tubing Clamp

1/4″ Compression Nut

Ferrule (sleeve)

Refrigerator

Connection

1/4″ Copper

Tubing

Instructions Installation

Turn the Water On at the Shutoff Valve

 

1

Tighten any connections that leak.

 

2

Replace the access cover and screws (on some

 

 

 

models).

 

 

 

 

 

 

 

 

Plug In the Refrigerator

 

 

 

Arrange the coil of copper tubing so that it does not

Push the refrigerator back to the wall.

vibrate against the back of the refrigerator or against

 

 

 

the wall.

 

 

 

Instructions Troubleshooting

Start the Icemaker

Set the icemaker feeler arm to the ON (down) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically if the icemaker feeler arm is in the ON (down) position.

NOTE: The icemaker may double-cycle when it first starts, causing some water spillage from the icemaker into the ice bucket. This is normal and should not happen again.

Tips

Customer Service

17

Page 16 Page 18
Page 17
Image 17
GE 16207744P008 owner manual Operating, Tips, Instructions Installation
Page 16 Page 18

16207744P008 specifications

The GE 16207744P008 is a prominent piece of innovative engineering, specifically designed to cater to various operational needs in industrial applications. This product is renowned for its precision, reliability, and cutting-edge technologies that enhance the performance and efficiency of systems it integrates with.

One of the main features of the GE 16207744P008 is its robust design, which ensures longevity and lower maintenance costs. It is manufactured using high-quality materials that can withstand challenging environments, making it suitable for various industrial settings, including energy generation, manufacturing, and transportation.

The GE 16207744P008 is equipped with advanced sensor technology which allows for real-time monitoring of operational parameters. This feature is crucial for optimizing performance and ensuring that systems operate within desired thresholds. The integrated sensors can significantly reduce the risk of overheating or failure, delivering peace of mind to operators.

Another standout characteristic of the GE 16207744P008 is its compatibility with a wide array of systems and equipment. This adaptability makes it an ideal choice for organizations looking to upgrade or replace components without overhauling entire systems. Its modularity supports various configurations, allowing companies to tailor solutions to their specific operational requirements.

In addition to its physical attributes, the GE 16207744P008 incorporates sophisticated software capabilities. These software features enable advanced diagnostics and predictive maintenance schedules, ensuring that potential issues are identified and addressed before they escalate. This proactive approach not only contributes to improved efficiency but also extends the lifespan of the equipment.

The energy efficiency of the GE 16207744P008 is another critical characteristic, as it aids organizations in reducing their operational costs. By optimizing energy consumption, the component contributes to more sustainable practices, aligning with the increasing emphasis on environmental responsibility in modern industrial operations.

Overall, the GE 16207744P008 represents a fusion of robustness, adaptability, and technology, making it an essential asset for any industrial environment. Its ability to enhance performance while minimizing downtime and maintenance solidifies its position as a preferred choice among engineers and operators alike. With the GE 16207744P008, organizations can leverage the latest advancements in industrial technology to stay ahead in a competitive landscape.