Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

OperatingInstructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

InstallationInstructions

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

TroubleshootingTips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

CustomerService

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

4

Page 4
Image 4
GE 16207744P008 owner manual OperatingInstructions, TroubleshootingTips, CustomerService

16207744P008 specifications

The GE 16207744P008 is a prominent piece of innovative engineering, specifically designed to cater to various operational needs in industrial applications. This product is renowned for its precision, reliability, and cutting-edge technologies that enhance the performance and efficiency of systems it integrates with.

One of the main features of the GE 16207744P008 is its robust design, which ensures longevity and lower maintenance costs. It is manufactured using high-quality materials that can withstand challenging environments, making it suitable for various industrial settings, including energy generation, manufacturing, and transportation.

The GE 16207744P008 is equipped with advanced sensor technology which allows for real-time monitoring of operational parameters. This feature is crucial for optimizing performance and ensuring that systems operate within desired thresholds. The integrated sensors can significantly reduce the risk of overheating or failure, delivering peace of mind to operators.

Another standout characteristic of the GE 16207744P008 is its compatibility with a wide array of systems and equipment. This adaptability makes it an ideal choice for organizations looking to upgrade or replace components without overhauling entire systems. Its modularity supports various configurations, allowing companies to tailor solutions to their specific operational requirements.

In addition to its physical attributes, the GE 16207744P008 incorporates sophisticated software capabilities. These software features enable advanced diagnostics and predictive maintenance schedules, ensuring that potential issues are identified and addressed before they escalate. This proactive approach not only contributes to improved efficiency but also extends the lifespan of the equipment.

The energy efficiency of the GE 16207744P008 is another critical characteristic, as it aids organizations in reducing their operational costs. By optimizing energy consumption, the component contributes to more sustainable practices, aligning with the increasing emphasis on environmental responsibility in modern industrial operations.

Overall, the GE 16207744P008 represents a fusion of robustness, adaptability, and technology, making it an essential asset for any industrial environment. Its ability to enhance performance while minimizing downtime and maintenance solidifies its position as a preferred choice among engineers and operators alike. With the GE 16207744P008, organizations can leverage the latest advancements in industrial technology to stay ahead in a competitive landscape.