After Each UseTrimmer, Replacing the Razor Heads

22ENGLISH

10Replace the frame and turn the lock clockwise until it locks into place.

C 11	Insert the notch of the shaving unit into
1	the slot in the top of the razor (1) and
2	then close the shaving unit (2).
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.

After Each Use:Trimmer

C 2	Push down spring-release trimmer switch.
C 3	Clean trimmer with the short-bristled side
	of the brush every time you use it. Brush
	up and down along the trimmer teeth.
C 4	Lubricate the trimmer teeth with one
	drop of mineral oil every 6 months.
5	Close trimmer by pressing trimmer down.

ENGLISH 23

wReplace the razor heads once a year for optimal shaving results.

wReplace damaged or worn razor heads with model HQ8 Philips Norelco razor heads only.

1Turn razor OFF, remove the charging plug from the outlet and power cord from the razor.

C 2	Press the Razor Head Release Button to
	open the Razor Head Assembly.
C 3	Pull the shaving unit off the razor.

2	C 4	Turn the lock counterclockwise to unlock

	1	(1) and remove the retaining frame (2).

5Remove the razor heads and place the new razor heads in the shaving unit.

C Make sure that the two pointy edges of the head fit exactly into the recesses.