10.
Do not clean the razor heads with the brush.
Do not clean more than one cutter and head at a time, since they are all matching sets.If you accidentally interchange the cutters and heads,it could take several weeks before optimal shaving performance is restored.
6Replace the set back into the Head Assembly in such a way that the sides with the little holes point to the middle of the shaving unit.
Make sure that the two pointy edges of the head fit exactly into the recesses.
7Repeat the process for the other two sets of razor heads.
8Replace the frame.
9Press down and turn wheel clockwise until it locks into place.
10Replace the Razor Head Assembly back on razor.
If the razor heads have been properly inserted,a shiny circle is visible in the middle of the razor head assembly.
11.
CLEANING
Once A Month:Razor Heads
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e. g.Norelco Razor Cleaner, model RC1776,or alcohol) and lubricated with Norelco Razor Lubricant,model AL80,or one drop of mineral oil ( in the center of the head).
Every Six Months:Trimmer
1Turn razor OFF.
2Push Trimmer Slide Switch up to pop up Trimmer.
3Clean Trimmer with the brush.
4Lubricate the Trimmer teeth with Norelco Razor Lubricant (model AL80) or with one drop of mineral oil.
5Close Trimmer by sliding Trimmer switch down.