4.
LCD DISPLAY
The display provides the following information:
Charging Indicator
As soon as you connect cord,the light in display area goes ON,the plug symbol appears and the minute indicator starts blinking.
Full Charge Indicator
When batteries have been fully charged,“FULL” scrolls across the display and light in display starts blinking.
Minutes Left Indicator
The number on the display shows remaining shaving time in minutes.The “squares” in the charge meter indicate how much power is still left in batteries.
Low Battery Indicator
When the batteries are running low, the plug symbol will blink after you have turned the razor OFF. If this occurs while shaving, you should have enough power to complete your shave.
When you turn razor ON or OFF, the light in the LCD
Display will come ON for approximately 10 seconds.
The razor has a
5.
Cleaning Indicator
The blinking faucet symbol reminds you that razor heads need to be cleaned and appears approximately once a week (in the case of normal use).
CHARGE METER
1Charge Meter monitors amount of remaining battery power and actual remaining shaving minutes available. “Minutes Left” is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use
2Initially your razor may need to go through 2 or 3 full charge/recharge cycles before “Minutes Left” indicator begins to display your accurate “Shaving Minutes Left”.
3The squares in the charge meter indicate how much power is left in the batteries.
CHARGING
Battery performance is best if you recharge only when the batteries are (almost) completely empty.
Charging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.
Continuously recharging or continuously using as a corded razor will reduce life of batteries.
You may also shave using the cord provided.This razor will not recharge while being used corded.
Recharge only when plug symbol starts blinking.This symbol may appear when your razor is ON or OFF.