HP 5Si NX, 5Si MX Simm Validation Error Messages, Hardware Type Hardware Device ZZ Error Number

SIMM Validation Error Messages

Validation error messages appear when a SIMM fails to be initialized when the printer is turned on. This error is in the format 53.XY.ZZ ERROR. Table 7-1 lists these errors.

Table 7-1	Validation Error Messages
X (Hardware Type)		Y (Hardware Device)	ZZ (Error Number)
0: ROM		0: Internal Memory	0: Unsupported memory
1: RAM		1: SIMM Slot 1	1: Unrecognized memory
		2: SIMM Slot 2	2: Unsupported memory size
		3: SIMM Slot 3	3: Failed RAM test
		4: SIMM Slot 4	4: Exceeded maximum RAM size
			5: Exceeded maximum ROM size
			6: Invalid SIMM speed
			7: SIMM reporting information incorrectly
			8: SIMM RAM parity error
			9: (n/a)
			10: SIMM address conflict
			11: ROM out of bounds
			12: Could not make temporary mapping

Although these errors can be ignored, the SIMM that caused the error will not be configured. If the SIMM causing the error is a RAM SIMM, the printer will continue to function with less RAM. If the SIMM is a ROM containing a printer personality (such as PostScript) the printer will continue but without that personality.

7 Maintenance & Troubleshooting

EN

Maintenance and Troubleshooting 7-21