Useful Information
43
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1KX-TG6561
Display message Cause/solution
Base no power
or
No link.
Reconnect AC
adaptor.
LThe handset has lost communication with the base
unit. Move closer to the base unit and try again.
LUnplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
LThe handset’s registration may have been cancelled.
Re-register the handset (page 28).
Check Phone Line LThe supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 8).
Error*1 LRecording was too short. Try again.
Memory Full LThe phonebook memory is full. Erase unwanted
entries (page 19).
LMessage memory is full. Erase unwanted messages
(page 34).*1
LThe call barred list memory is full. Erase unwanted
entries (page 28).*1
Use rechargeable
battery.
LA wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
You must first
subscribe to
Caller ID.
LYou must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
TG6551-6561BX(e).book Page 43 Friday, July 23, 2010 10:06 AM