Base Unit Speed Dial
21
Base unit speed dialYou can assign one phone number to
each of the 10 dial keys ({0} – {9}) on
the base unit.
Adding phone numbers to
speed dial
Important:
LBefore adding phone numbers, make
sure the base unit is not in use.
1{l}
LThe in use indicator flashes.
2Enter the phone number (24 digits
max.).
LIf a pause is required for dialling,
press {R/P} where needed
(page 15).
LIf you enter incorrectly,
– continue and finish step 4, then
start again from step 1.
– press {■}, then start again from
step 1. (KX-TG6561)
3{l}
4Press a dial key ({0} – {9}) to
assign.
LA long beep is heard and the in
use indicator stops flashing.
Note:
LIf a phone number is assigned to a dial
key which already contains a phone
number, the old number will be
erased.
LWe recommend you make a note of
which phone numbers are stored in
which dial keys.
To erase a stored phone number
1{l} 2 times
2Press the desired dial key ({0} –
{9}).
Making a call using the speed
dial keys
1■ KX-TG6551:
{s} i {$}
■ KX-TG6561:
{s} i {l}
2Press the desired dial key ({0} –
{9}).
Note:
LSpeed dial numbers can only be
dialled from the base unit.
TG6551-6561BX(e).book Page 21 Friday, July 23, 2010 10:06 AM