Useful Information
45
*1KX-TG6561
Battery recharge
Making/answering calls, intercom
While programming,
the display returns to
standby mode.
LA call matching an entry in the call barred list is being
received.*1 Wait and try again later.
I cannot activate the
eco mode.
LYou cannot set eco mode when you set the repeater
mode “On”. If required, set the repeater mode to
“Off” (page 29).
I cannot register a
handset to a base unit.
LThe maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 29).
LYou entered the wrong PIN. If you forget your PIN,
contact an authorised service centre.
Problem Cause/solution
The handset beeps
and/or ) flashes.
LBattery charge is low. Fully charge the batteries (page
8).
I fully charged the
batteries, but
–) still flashes or
– the operating time
seems to be shorter.
LClean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
LIt is time to replace the batteries (page 8).
The handset display is
blank.
LThe handset is not turned on. Turn the power on (page
12).
Problem Cause/solution
_ is displayed. LThe handset is too far from the base unit. Move closer.
LThe base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
LThe handset is not registered to the base unit. Register
it (page 28).
LActivating one touch eco mode reduces the range of
the base unit in standby mode. If required, turn eco
mode off (page 13).
Problem Cause/solution
TG6551-6561BX(e).book Page 45 Friday, July 23, 2010 10:06 AM