Programming
Special programming
Alarm
An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.
Important:
L Set the date and time beforehand (page 13).
18i {#}{7}{2}{0}
2{V}/{^}: Select the desired alarm option. i M
“Off”
Turns alarm off. Go to step 6.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time. Go to step 4.
3Enter the desired date and month. i M
4Set the desired time. i M
5{V}/{^}: Select the desired alarm tone. i M
L We recommend selecting a different ringer tone from the one used for outside calls.
6Mi {ic}
L When the alarm is set, Eis displayed.
Note:
L When you select Arabic or Persian as the display language, enter the desired month and date.
L To stop the alarm, press any dial key or place the handset on the base unit or charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
Changing the handset name
Each handset can be given a customised name (“Bob”, “Kitchen”, etc.). You can also select whether or not the handset name is displayed in standby mode. The default setting is “Off”. If you select “On” without entering any handset name, “Handset 1” to “Handset 6” is displayed.
18i {#}{1}{0}{4}
2Enter the desired name (max. 10 characters; page 41).
L If not required, go to step 3.
3M
4{V}/{^}: Select the desired setting. i M2 times
5{ic}
Storing an area code to be deleted automatically
In some situations, phone numbers stored automatically in the caller list (page 30) will include area codes. If you do not want to dial the area code when making calls from the caller list, you can store the area code which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the caller list to the phone number
18i {#}{2}{5}{5}
2Enter an area code (5 digits max.). i Mi {ic}
27
