Getting Started
13
Initial settings

Display language

3 display languages are available.
You can select “English”, “”, or
“”.
18 i {#}{1}{1}{0}
2{V}/{^}: Select your desired
language. i M i {ic}

Dialling mode

If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
18 i {#}{1}{2}{0}
2{V}/{^}: Select the desired setting.
i M i {ic}

Date and time

18 i {#}{1}{0}{1}
2Enter the current date, month, and
year. i M
Example:15 July, 2010
{1}{5} {0}{7} {1}{0}
3Enter the current hour and minute.
Example:15:30
{1}{5} {3}{0}
4M i {ic}
Note:
LWhen you select Arabic or Persian as
the display language, enter the
current year, month, and date.
LTo correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
LThe date and time may be incorrect
after a power failure. In this case, set
the date and time again.
One touch eco mode
The {ECO/R} button on the handset
enables you to activate the eco function
with one touch.
By activating eco mode, your unit can
reduce the base unit transmission power
by up to 90% in standby mode.
You can turn on/off one touch eco mode
by just pressing {ECO/R}. The default
setting is “Normal”.
– When the one touch eco mode is on:
“Low” is temporarily displayed and
i is shown on the handset display
instead of w.
– When the one touch eco mode is off:
“Normal” is temporarily displayed
and i goes off from the handset
display.
Note:
LWhen there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be
reduced.
LActivating one touch eco mode
reduces the range of the base unit in
standby mode.
LIf you set the repeater mode to “On”
(page 29):
– One touch eco mode is cancelled.
Symbol meaning:
Example:{V}/{^}: “Off”
Press {V} or {^} to select the words
in quotations.
Important:
LWhen the language selection is
displayed after installing the
batteries for the first time, perform
step 2.
TG6551-6561BX(e).book Page 13 Friday, July 23, 2010 10:06 AM