Programming
28
Incoming call barring (Caller
ID subscribers only)
This feature allows the unit to reject calls
from specified phone numbers that you
do not want to answer such as junk calls.
When a call is received, the unit does not
ring while the caller is being identified. If
the phone number matches an entry in
the call barred list, the unit sends out a
busy tone to the caller, and then
disconnects the call.
Important:
LWhen the unit receives a call from a
number that is stored in the call barred
list, the call is logged in the caller list
(page 30) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in
the call barred list by using the caller list
or by entering the numbers directly.
Important:
LYou must store the phone number
with an area code in the call barred
list.
■From the caller list:
1{<} (y)
2{V}/{^}: Select the entry to be
barred. i I
3{V}/{^}: “Caller Barred” i
M
4{V}/{^}: “Yes” i M i
{ic}
■By entering phone numbers:
18 i {#}{2}{1}{7} i m
2Enter the phone number (24
digits max.). i M
LTo erase a digit, press ^.
3{ic}
Viewing/editing/erasing bar call
numbers
18 i {#}{2}{1}{7}
2{V}/{^}: Select the desired entry.
LTo exit, press {ic}.
3To edit a number:
~ i Edit the phone number.
i M i {ic}
To erase a number:
W i {V}/{^}: “Yes” i M
i {ic}
Note:
LWhen editing, press the desired dial
key to add, ^ to erase.
Changing the base unit PIN
(Personal Identification
Number)
Important:
LIf you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, contact an authorised
service centre.
18 i {#}{1}{3}{2}
2Enter the current 4-digit base unit
PIN (default: “0000”).
3Enter the new 4-digit base unit PIN.
i M i {ic}
Registering a unitRegistering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
Available for:
KX-TG6561
TG6551-6561BX(e).book Page 28 Friday, July 23, 2010 10:06 AM