HP 5Si NX, 5Si MX manual T e Table C-1, Size Part Number

C

Memory and Personality SIMM

Installation

N o t e

Table C-1

Your HP LaserJet 5Si/5Si MX/5Si NX has four single inline memory module (SIMM) slots for memory expansion. For the 5Si/5Si NX, all four are available for expansion. For the 5Si MX, one slot is occupied by a 8 MByte memory SIMM and another slot is occupied by a SIMM holding Adobe’s PostScript Level 2 language. Therefore, there are two available slots that you can use to install additional printer memory and printer personalities.

The printer contains 4 MBytes of on board memory. By adding optional SIMMs with 2, 4, 8, 16, or 32 MBytes, you can increase memory to a total of 76 MBytes (for the 5Si MX).

Memory SIMMs for the HP LaserJet 4 Plus and 4M Plus printers can be used in the HP LaserJet 5Si series. PostScript language SIMMs for any other printer cannot be used in the HP LaserJet 5Si series.

When you get a new memory board, compare the part number on the outside of the package to the part number in Table C-1 below. If you have not received the correct SIMM, notify your authorized Hewlett-Packard dealer.

Memory SIMM Part Numbers

Size	Part Number
2 MBytes	C3131A
4 MBytes	C3132A
8 MBytes	C3133A
16 MBytes	C3146A

N o t e	32-MByte SIMMs are not available from HP. The 32-MByte SIMMs are
	supported, but must be obtained through third-party providers.

EN

Memory and Personality SIMM Installation C-1