HP 5Si NX, 5Si MX manual Printer is attempting to No action required

Printer Messages, continued

Message	Description	Recommended Action
CLEARING PAPER FROM	The printer is attempting to	No action required.
PRINTER	remove unusable paper (such as
	after a paper jam)
REMOVE PAPER FROM TOP	The destination output bin is full	Remove the paper from the
OUTPUT BIN	and no more pages can be sent to	indicated output bin.
or	that bin.
REMOVE PAPER FROM
OPTIONAL OUTBIN n
INPUT DEVICE FEED PATH	The 2000-sheet input tray (Tray 4)	Push Tray 4 into the printer
OPEN	is open.	until completely closed.
OUTPUT DEVICE DELIVERY	The output device is not properly	Ensure the output device is
PATH OPEN	seated against the printer or the	pushed flush against the
	stapler lid is open.	side of the printer and close
		the stapler lid.
STAPLE LIMIT REACHED	The stapler’s 20-sheet limit has	Send only print jobs of 20
	been reached. Job is not stapled.	pages or less to the stapler.
STAPLER SUPPLY OUT	The stapler is out of staples. Job is	Load a new stapler cartridge.
	not stapled.
STAPLER MALFUNCTION	The stapler has not finished	Clear the stapler jam and
	correctly.	resend job.
STAPLER ALIGN ERROR	The paper is misaligned and	Remove the paper from the
	cannot be stapled.	stapler and resend the job.

7 Maintenance & Troubleshooting

Continued on the next page.

EN Maintenance and Troubleshooting 7-39