HP 5Si MX, 5Si NX manual Printing Envelopes from Your Software Application

Paper Source:
	TRAY 1
Paper Size:
	Com 10 Envelope

Orientation

Portrait

Landscape

Printing Envelopes from Your Software Application

1Load up to ten envelopes into Tray 1.

2Specify Tray 1, Automatic, or select the media source by type in your software application, and set the envelope size and type to the appropriate envelope size, such as COM 10 or DL.

3If your software does not automatically format an envelope, specify Landscape for page orientation in your application.

C A U T I O N

To avoid a printer jam, once you begin printing, do not remove an envelope and reinsert it.

For best print quality, use the following table to set margins for a return and mailing address. It gives you typical address margins for a Commercial #10 or DL envelope. For envelopes of other sizes, adjust the margin settings until they please you. Avoid printing over the area where an envelope’s three back flaps meet.

Type of Address	Left Margin	Top Margin
Return	0.5 in (15 mm)	0.5 in (15 mm)
Mail destination	4.0 in (85 mm)	2.0 in (51 mm)

5-18 Print Tasks

EN