HP 5Si NX, 5Si MX manual Printer Control Panel

Key to Figure 4-6

1.Font is the name of the font.

2.Pitch/Point indicates the specified pitch or point size of the font. “Scale” indicates a scaleable font.

3.Escape Sequence (a PCL programming command) is used to select the designated font.

4.Font # is the number used to select internal or downloaded soft fonts from the control panel. (Do not confuse the font number with the soft font ID, described next.) The letter preceding the font number shows the source of the font (I means Internal, and S means permanent soft font, and M means SIMM - slot number follows).

5.Font ID is the number the user assigns to soft fonts when downloading them through software.

4 Printer Control Panel

EN Printer Control Panel 4-19