Clearing the Left Door Fuser Area | HP 5Si MX, 5Si NX specs

Clearing the Left Door (Fuser Area)

1Open the left door. If a mailbox accessory is installed, push it away from the printer first to access the left door.

W A R N I N G Avoid touching the adjacent fusing area. It may be HOT.

2Remove any jammed or damaged paper from this area by pulling it in the direction shown by the arrow (A) in Figure 7-5.

3Lower the two green tabs and carefully check for additional pieces of paper. Remove all scraps.

4Close the door.

5Push the mailbox back into place, if one is installed.

Figure 7-7

Left Door

A.Left door jam

B.Fuser area jam

7-30 Maintenance and Troubleshooting