HP 5Si NX, 5Si MX manual Selecting the Left Output Bin through the Software

	Selecting the Left Output Bin
	The Left Output Bin should be used for envelopes, transparencies, and
	labels. Using this bin helps reduce paper curl.
	Selecting the Left Output Bin through the Software
	You can select an output bin through your software application or printer
	driver, or from the printer control panel. Normally, we recommend
	designating the paper destination in your software or printer driver, since
	options set there override printer control panel settings. Follow the
	instructions below for setting the Left Output Bin as the printer’s default
	output bin through the printer control panel.
	Where and how you make selections depends on your software
N o t e
	application or associated printer driver. In some environments, the
	selection process may be available only from within the printer driver (if
	the control panel has been locked by the network administrator, for
	example.) See Chapter 3 or your application manual for more
	information.

Selecting the Left Output Bin from the Control Panel

1Press [Menus] repeatedly until CONFIGURATION MENU appears.

2Press [Items] repeatedly until PAPER DESTINATION=TOP OUTPUT BIN * appears.

3Press [+] repeatedly until OPTIONAL OUTPUT BIN 1 or bin name assigned to it by the Network Administrator appears.

4Press [Select *] to save your choice. An asterisk (*) appears next to your selection.

5Print Tasks

EN

Print Tasks 5-25