Printer Messages, continued

Message

Description

Recommended Action

 

 

 

TRAY n EMPTY

The indicated tray is empty.

The printer will still function.

 

 

Load paper, if desired.

 

 

 

TRAY n OPEN

The indicated tray is open.

The printer will still function.

 

 

Close the tray, if desired.

 

 

 

RESTORING FACTORY

The printer returns almost all

Reconfigure your printer and

SETTINGS

settings to their factory default

MIO.

 

configurations.

When you install an MIO

 

 

 

 

card(s), to reinitialize the

 

 

printer control panel you may

 

 

need to perform a cold reset.

 

 

(Note: In a shared

 

 

environment, this task should

 

 

only be performed by the

 

 

system administrator.) To

 

 

perform a cold reset, hold

 

 

down [On Line] while

 

 

switching the printer ON until

 

 

RESTORING FACTORY

 

 

SETTINGS appears in the

 

 

display.

 

 

 

CLOSE PRINTER COVERS

One of the printer’s covers or

Make sure your toner

 

doors is not firmly closed, or your

cartridge is fully seated and

 

toner cartridge is not installed

the printer top cover or doors

 

correctly.

(left, front, and right) are

 

 

firmly closed.

 

 

 

ACCESS DENIED

Your network administrator has

See your network

 

locked out access to the control

administrator.

 

panel menu system, except for the

 

 

Test Menu and Tray 1 size.

 

 

 

 

INSTALL TONER CARTRIDGE

The toner cartridge is not installed

Insert a toner cartridge or

 

correctly or is not installed.

make sure the cartridge is

 

 

fully seated and the covers

 

 

are fully closed.

 

 

 

LOAD TRAY X

The printer received a request for

Load the indicated tray with

<media type> <paper

a media type, or paper/envelope

the correct media, or see

size>

size not available in the printer.

Chapter 4 or 5 to change the

or

 

media size and type through

LOAD ENV FEEDER

 

the control panel.

<media type> <paper

 

 

size>

 

 

 

 

 

7 Maintenance & Troubleshooting

Continued on the next page.

EN

Maintenance and Troubleshooting 7-37

Page 150
Image 150
HP 5Si NX, 5Si MX manual Media type paper