14ENGLISH
Cleaning3 Replace razor head assembly.
Once a week: Razor
◗Regularcleaning guarantees better shaving results.
Always turn razor off, unplug from outlet and | |
remove cord from razor before cleaning. | |
C 1 | Clean the top of the razor with the |
| supplied brush. |
C 2 | Press the Razor Head Release Button and |
| remove Razor Head Assembly from the |
| razor unit. |
C 3 | Brush out hairs from the inside of Razor |
| Head Assembly and hair chamber. |
C 4 | Replace the Razor HeadAssembly back on |
| razor. |
Every Two Months: Razor Head
Do not mix up the cutters and combs as the shaving performance may be adversely affected
for several weeks before optimal shaving performance is restored.
ENGLISH 15
1 | Turn razor to Off (O) position, remove plug |
| from outlet and disconnect cord from razor. |
C 2 | Press the Razor Head Release Button and |
| remove Razor Head Assembly from the |
| razor unit. |
C 3 | Brush the inside of the razor housing. |
4 | Turn Razor Head Assembly over so that |
| underside is exposed. |
C 5 | Turn wheel of frame counterclockwise. |
6 | Remove the frame and brush clean. |
C 7 Remove and clean one cutter and comb at a time.
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving performance is restored.
8 | Separate the cutter from the comb. |
C 9 | Only brush the cutter in an upward |
| motion. Use the short bristled side of the |
| brush. |