Philips 6856XL, 6853XL manual Brush the slots of the comb, Wear of the shaving heads

Page 9

16ENGLISH

C 10 Brush the slots of the comb.

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Head Cleaner, model RC1776

or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).This helps prevent

wear of the shaving heads.

ENGLISH 17

After Each Use:Trimmer

1Turn razor to OFF (O) position.

 

C

 

Push trimmer slide switch up to pop up

 

2

 

C

trimmer.

 

Clean trimmer with the brush every time

 

 

C 11

12

13

C 14

C 15

16

Replace the cutter and comb into the Razor Head Assembly.

Repeat the process for the other two sets of cutters and combs.

Replace the frame.

Turn the wheel clockwise until it locks into place.

Replace the Razor Head Assembly back on razor.

Put the protective razor head cap on the razor to protect heads.

3

you use it.

C 4 Lubricate the trimmer teeth with Norelco Razor Lubricant (model AL80) or with one drop of mineral oil every 6 months.

5 Close trimmer by sliding trimmerswitch down.

This razor has no other user-serviceable parts.

Any other service should be performed by an

Authorized Norelco Service Location.

Image 9
Contents 6856XL 6853XL 6856XL/6853XL Important Safety Instructions Table of Contents Cleaning Brush Travel/Storage Pouch FeaturesFull 2-YearWarranty Day Money Back Guarantee Full Width Pop-Up TrimmerIndications ChargingQuick Charge How To Shave With An Electric Razor Put It To The Test & Shaving TipsTrimming Remove cord from razor before cleaning Regularcleaning guarantees better shaving resultsClean the top of the razor with Head Assembly and hair chamberWear of the shaving heads Brush the slots of the combAccessories Battery RemovalAssistance Storage Full TWO Year Warranty