28ENGLISH
C | 2 Place new Razor Head Assembly back |
| on razor and push down (you will hear a |
| click). |
| The Razor Head Assembly will only fit correctly in |
| one position on razor. Make sure to align the |
| 2 shaving lotion dispensing holes on the Razor |
| Head Assembly with the 2 shaving lotion tubes on |
| the razor. |
| This razor has no other |
| For assistance call |
Maintenance
◗Always remove razor from charging stand before cleaning appliance.
◗Unplug charging stand.The stand
may be wiped clean using a damp cloth.
◗Water from the tap should be on a warm setting to clean any washable parts.
Note: DO NOT place or clean any parts of the charging stand in a dishwasher.
Storage
◗The razor can be placed in the charging stand for safe storage. If storing razor in charging stand, remove the plug from outlet as soon as the razor is fully charged.
◗If appliance will not be used for an extended period of time, it is recommended that you
|
| ENGLISH 29 |
|
| thoroughly clean Razor Head Assembly |
|
| before storing. |
| ◗ | The razor can be stored in the pouch |
|
| supplied.The pouch will add extra protection |
|
| during travel. |
| ◗ | Be sure razor is turned off. Remove cord from |
|
| outlet and charging stand before storing in a |
|
| safe, dry location where it will not be crushed, |
|
| banged, or subject to damage. |
| ◗ | Do not wrap cord around razor or charging |
|
| stand when storing. |
| ◗ | Store cord in a safe location where it will not |
|
| be cut or damaged. |
| ◗ | Do not keep charging stand permanently |
|
| plugged into outlet. |
| ◗ | Do not place or store charging stand where it |
|
| can fall or be pulled into a tub or sink, water or |
| C ◗ | other liquid while plugged in. |
| During storage, always put Protective Razor | |
|
| Head Cap on razor to protect heads. |
Assistance
◗For assistance, call toll free:
or visit our website: www.philips.com/norelco
◗Information is available 24 hours a day, 7 days a week.