14ENGLISH
4Close trimmer by sliding trimmer switch down.
5Turn razor OFF.
Cleaning
C ◗The tap symbol on the back of the razor indicates that the razor can be rinsed under running tap water.
◗Regular cleaning guarantees better shaving results.
◗Always switch Razor OFF, unplug and remove power cord before cleaning.
◗Never clean, remove or replace head assembly while motor is on.
◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage
◗Do not use razor if combs are damaged or broken. Facial injury may occur.
Every Week: Razor Heads
◗The easiest and most hygienic way to clean the razor heads and hair chamber is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
ENGLISH 15
◗Regular cleaning guarantees better shaving results.
◗Do not immerse razor in water.
1Always turn razor OFF, remove the charging plug from outlet and remove cord from razor before cleaning.
C 2 Press the Razor Head Release Button, flip open the Razor Head Assembly.
C 3 | Clean inside razor heads and hair chamber |
| by running under hot water. |
C 4 | Clean outside of Razor Head Assembly by |
| running under hot water. |
5 | Close the Razor Head Assembly and shake |
| off excess water. |
NOTE: Do not wipe or dry the shaving heads | |
with a towel or tissue.This could damage the | |
shaving heads. | |
C 6 | Open Razor Head assembly again and |
| leave open to air dry. |