22ENGLISH
Cleaning
C ◗ The tap symbol on the back of the razor indicates that the razor can be rinsed under running tap water.
◗Regular cleaning guarantees better shaving results.
◗Always switch Razor OFF and remove from charging stand before cleaning.
◗Never clean, remove or replace head assembly while motor is on.
◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage
◗Do not use razor if combs are damaged or broken. Facial injury may occur.
◗Unplug the charging stand. The charging stand may be wiped clean using a damp cloth.
C 1 The faucet symbol will start blinking after each shave to remind you that the razor needs to be cleaned.
Cleaning: Razor Heads
The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
◗Regular cleaning guarantees better shaving results.
ENGLISH 23
1Always turn razor OFF, unplug from outlet and remove cord from razor or charging stand before cleaning.
C 2 | Press the Razor Head Release Button, flip |
| open the Razor Head Assembly. |
C 3 | Clean inside razor heads and hair chamber |
| by running under hot water. |
C 4 | Clean outside of Razor Head Assembly by |
| running under hot water. |
5Close the Razor Head Assembly and shake off excess water.
C 6 Open Razor Head assembly again and leave open to air dry.
NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads.
C 7 | If the shaving unit becomes detached from |
| the shaver, you can easily reattach it. |