After Each Use Trimmer, Replacing the Razor Heads

26ENGLISH

After Each Use: Trimmer

1	Turn razor OFF.
2	Push down spring-release trimmer switch.
C 3	Clean trimmer with the brush every time
	you use it.
C 4	Lubricate the trimmer teeth with Philips
	Norelco Razor Lubricant (model AL80) or
	with one drop of mineral oil every 6
	months.
5	Close trimmer by pressing trimmer down.

This razor has no other user-serviceable parts.

Any other service should be performed by the

Philips Norelco Service Location.

Replacing the Razor Heads

◗Replace the razor heads once a year for optimal shaving results.

◗Replace damaged or worn razor heads with model HQ9 Philips Norelco razor heads only.

Razor head check indication

◗The replacement head indicator symbol starts blinking to remind you to check if it’s time to replace your razor heads to obtain optimal shaving results.

ENGLISH 27

Storage

C ◗ The razor can be placed in the charging stand for safe storage. If storing razor in stand, remove the plug from outlet as soon as the razor is fully charged.

◗Be sure razor is turned off. Remove cord from outlet and razor or charging stand before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.

◗Do not wrap cord around razor or charging stand when storing.

◗Store cord in a safe location where it will not be cut or damaged.

◗Do not keep razor or charging stand permanently plugged into outlet.

◗Do not place or store razor or charging stand where it can fall or be pulled into a tub or

sink, water or other liquid while plugged in. C ◗ Put the Protective Razor Head Cap on razor

to protect heads.

Travel Lock

If you are going to travel, it is possible to lock the razor.The travel lock prevents the razor from being switched on by accident.

Activating the travel lock

C ◗ Press the ON/OFF button for 3 seconds. The razor is switched OFF and the key symbol rotates once.The travel lock is now activated.