20ENGLISH
Cleaning: Razor Heads
The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
◗Regular cleaning guarantees better shaving results.
◗Do not immerse razor in water.
1Always turn razor OFF, unplug from outlet and remove cord from razor or charging stand before cleaning.
C 2 | Press the Razor Head Release Button, flip |
| open the Razor Head Assembly. |
C 3 | Clean inside razor heads and hair chamber |
| by running under hot water. |
C 4 | Clean outside of Razor Head Assembly by |
| running under hot water. |
5 | Close the Razor Head Assembly and shake |
| off excess water. |
ENGLISH 21
C 6 Open Razor Head assembly again and leave open to air dry.
NOTE: Do not wipe or dry the shaving heads | |
with a towel or tissue.This could damage the | |
shaving heads. | |
C 7 | If the shaving unit becomes detached from |
| the razor, you can easily reattach it. |
8 | You may also clean the hair chamber |
| without water by using the supplied brush. |
Once A Month: Razor Heads
Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.
1Turn razor OFF, remove the charging plug from the outlet and cord from the razor
or charging stand.
C 2 Press the razor head release button to open the razor head assembly.
C 3 | Turn the wheel counterclockwise (1) and |
| remove the retaining frame (2). |