12ENGLISH
To replace clock battery
ENGLISH 13
Before First Use
C |
1 |
2 |
C |
C |
1
2
3
Turn clock module counterclockwise (1) and remove from stand (2).
Remove battery cover and then use a flat- bladed screwdriver to lift out the battery.
Replace battery with 1.5V button cell watch battery, placing rounded side of battery into battery compartment, flat side
(+) facing out. Replace battery cover.
◗Charge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it.
Important
◗Only use the power plug and/or charging stand provided to charge the razor.
◗The charging plug transforms 100 – 240V AC to less than 24V DC.
Charging
◗ Battery performance is best if you recharge |
only when the batteries are (almost) |
completely empty. |
◗ Charging or recharging at temperatures below |
40ºF or higher than 95ºF adversely affects |
lifetime of batteries. |
◗ Continuously recharging or continuously using |
C 4 Replace clock module into stand (1) and turn clockwise to secure in place (2).
2
1
as a corded razor will reduce life of batteries. |
◗ You may also shave using the cord provided. |
This razor will not recharge while being used |
corded. |
◗ Do not charge razor in a pouch. |
◗ Recharge only when the bottom light on the |
display lights up red. |
◗ Do not charge/recharge or use razor corded |
until fully dried. |