Philips D350, D359 important safety instructions Important Safety Instructions, English, Features

Page 1

4203.000.5253.2.qxd 5/2/03 4:44 PM Page 1

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

Read all instructions before using this appliance.

DANGER

To reduce the risk of electric shock:

1.

Do not reach for a Shaper that has fallen

 

into water. Unplug immediately.

2.

Do not use while bathing or in a shower.

3.

Do not place or store Shaper where it can

 

fall or be pulled into a tub or sink. Do not

 

place in or drop into water or other liquid.

4.

Always unplug this Shaper from the electrical

 

outlet immediately after using, except when

 

Shaper is (re)charging.

5.

Unplug Shaper before cleaning.

FEATURES

I

D-Finer Precise Shaper with

Dual Defining Technology

Put it to the test. Like many new products, your Norelco D-Finer Precise Shaper may take a little getting used to. So take the time to get acquainted with the two-step shaping and finishing process. Use the narrow specialty Hi- Definition Trimmer to shape your beard, even in the smallest areas. Then follow-up with the narrow shaving mini-foil to shave along the edges and eliminate any stubble to create a smooth and clean contoured beard line.

Use the D-Finer Precise Shaper in addition to your beard trimmer and razor to create and maintain the beard shape that defines your personal style.The unique ergonomic design makes it easy to see exactly what you’re doing so you get precisely the look you want.

Before You Begin

Preparing your beard for shaping

Follow these steps to prepare your beard.

Gently press the shaving mini-foil to the skin. Do not press too hard.

To maintain a shape, use the shaving mini-foil to shave along the edges to provide a smooth and clean beard line.

2Switch the D-Finer Shaper OFF. Put on the protective shaving head cap to protect the specialty Hi-Definition Trimmer and the shaving mini-foil.

CLEANING

◗ Always switch D-Finer Precise Shaper off

before cleaning.

◗ Do not use abrasives, scourers or liquids such

as alcohol, benzene, bleach or acetone to

clean the D-Finer Shaper.

◗ Never clean the specialty Hi-Definition

Trimmer or shaving mini-foil with the motor

ON.

◗ Do not apply pressure to specialty Hi-

Definition Trimmer or shaving mini-foil. Do

not touch specialty Hi-Definition Trimmer or

shaving mini-foil with hard objects as this may

If the mini-foil cutter is worn or damaged, do not continue using the appliance. Replace the mini-foil cutter and the shaving mini-foil immediately.

A worn or damaged mini-foil cutter should only be replaced with an original Philips cutter, which is available at an authorized Norelco Service Location.

1

 

14

Remove the detachable

 

 

shaving head by pulling it

 

 

from the Shaper (fig. 14)

 

2

Remove the old mini-foil

15

 

cutter by pulling it from the

 

 

appliance (fig. 15).

 

3Make sure that the spring within the driving unit does not get lost.

4 Insert the new mini-foil

60-DAY MONEY-

BACK GUARANTEE

If you are not fully satisfied with your Norelco D-Finer Precise Shaper, send the product back and we’ll refund you the full purchase price.

The D-Finer Precise Shaper must be shipped pre- paid by insured mail, insurance prepaid, and have the sales receipt, indicating purchase price and the date of purchase, enclosed.The D-Finer Precise Shaper must be postmarked no later than 60 days after the date of purchase. Norelco reserves the right to verify the purchase price of the D-Finer Precise Shaper and limit refunds not to exceed sug- gested retail price.

Send dated sales receipt, your complete name and address as indicated below, and the D-Finer Precise Shaper, prepaid to:

Norelco Consumer Products Company

A Division of Philips Electronics

North America Corporation

450 North Medinah Road, Dock 16

Roselle, IL 60172-2329

Please allow 4-6 weeks for delivery of check. Name

6. When discarding Shaper, unplug Shaper and

remove rechargeable battery. See Battery

Removal instruction sheet.

WARNING

To reduce the risk of burns, fire, electric shock or injury to persons:

1.

Close supervision is necessary when

 

this appliance is used by, on, or near children

 

or invalids.

2.

Use this Shaper for its intended household

A. Removable Shaving Head

B. Shaving mini-foil

C. Protective Cap

D. Specialty Hi-Definition Trimmer

E. On/Off Switch

F.

Charging Indicator Light

G. Power Cord Socket

H. Power Cord

I.

Adaptor

J.

Cleaning Brush

K. Full Two-Year Warranty

1Use a Norelco beard and moustache trimmer to trim your beard (Fig.3).

2Use a Norelco razor to shave larger areas of the skin (Fig.4).

3

4

damage them.

◗ Do not use while bathing, showering or

immerse the D-Finer in water or other liquids

as damage to D-Finer Shaper may occur.

◗ Clean cut hairs from D-Finer Shaper as they

accumulate during use.

◗ Always clean D-Finer Shaper after each use

and before storing.

1 Make sure D-Finer Shaper is switched

OFF and disconnected from the electrical

outlet.

cutter carefully into the

driving unit (fig. 16).

5 When the mini-foil cutter

is properly positioned,

push it into its end

position with your finger

(fig. 17).

17

6 Replace the detachable shaving head on

Address

City

State

 

Zip

 

 

 

 

 

 

 

Daytime Telephone No. (

)

 

 

 

 

 

 

AREA CODE

Email Address:

REASON FOR RETURNING:

 

use as described in this manual. Do not use

 

attachments not recommended by Philips

 

Electronics North America Corporation.

3.

Never operate this Shaper if it has a

 

damaged cord or plug, if it is not working

 

properly, if it has been dropped, damaged, or

 

dropped into water. Return the Shaper to an

 

Authorized Norelco Service Location for

 

examination and repair.

4.

Keep the Shaper and cord away from heated

 

surfaces.

5.

Never drop or insert any object into any

 

opening.

6.

Do not operate, charge or plug in Shaper

 

outdoors or where aerosol (spray) products

 

are being used or where oxygen is being

 

administered.

7.

Do not use this Shaper with a damaged or

 

broken specialty Hi-Definition Trimmer or

 

mini-foil, as facial injury may occur.

8.

Always attach plug to Shaper first, then to

 

outlet.To disconnect, turn on/off switch to

 

“OFF” position (switch is down), then

 

remove plug from outlet.

9.

To prevent possible damage to the cord, do

 

not wrap cord around the Shaper.

10.Never put Shaper in direct sunlight or store at a temperature above 140°F.

L. 60-Day Money-Back Guarantee

To Charge/Recharge

◗(Re)charging requires 10 full hours.

◗Use only the cord provided.

◗Battery performance is best if you recharge only when the battery is (almost) completely empty.

◗Charging or recharging at temperatures below 40˚F or higher than 95˚F adversely affects lifetime of the battery.

◗Continuously recharging Shaper will reduce life of battery.

1 Be certain Shaper is OFF.

2 Connect the power cord

1

plug to Shaper (Fig. 1).

 

Do not charge Shaper for more than 24 hours.

3

Plug adaptor into any 120V AC outlet.

 

 

Use only the cord provided.

 

4

Green Charging Indicator

2

 

Light on the adaptor will

 

 

go on to indicate the

 

 

Shaper is charging (Fig. 2).

 

 

A full charge takes

 

Shaping

Now you can shape and define your facial hair style.

Use the D-Finer Precise Shaper on a clean, dry face. Do not use any type of lotion or cream before using.

Use the Precise Shaper only for its intended household use as described in this manual.

1 Slide the specialty Hi-

5

Definition Trimmer out

 

until you hear a “click”

 

and the Hi-Definition

 

Trimmer snaps into

 

position.You will see the

 

slide-out mark (Fig. 5).

 

The slide-out mark is hidden underneath the specialty Hi-Definition Trimmer and only becomes visible when the specialty Hi- Definition Trimmer has been slid out correctly and “clicks” into position.

2Switch the D-Finer Precise Shaper ON.

3Shape the contours of your beard and sideburns with the specialty Hi-Definition Trimmer.

4

To contour most

6

 

effectively, place the flat

 

 

surface of the specialty Hi-

 

 

Definition Trimmer in

 

 

contact with the skin and

 

2 Make sure the specialty Hi-Definition

Trimmer is down in its original position.

3

Remove the removable

8

 

 

shaving head by pulling it

 

 

off the D-Finer body

 

 

(Fig. 8).

 

4Shake or blow cut hairs from the shaving head. Carefully clean the cutting unit and the shaving head and body of the D-Finer Shaper with the brush supplied.

Important: Do not clean the shaving mini- foil with the brush. The brush may damage the shaving mini-foil.

5 Put on the protective

9

shaving head cap to

 

protect the specialty Hi-

 

Definition Trimmer and the

 

shaving mini-foil (Fig. 9).

 

Replacing The Shaving Mini-foil

If the shaving mini-foil is worn or damaged, do not continue using the appliance. Replace the shaving mini-foil immediately.

A worn or damaged shaving mini-foil should only be replaced with an original Philips shaving mini-foil, which is available at an authorized Norelco Service Location.

the Shaper.

This shaper has no other user-serviceable parts. Any other service should be performed by an Authorized

Norelco Service Location.

Assistance

For assistance or the Authorized Norelco Service Location nearest you, call toll free:

1-800-243-3050

or for live help online visit our website: www.norelco.com

Authorized Norelco Service Location information is available 24 hours a day, 7 days a week.

Battery Removal

◗This Norelco D-Finer Shaper contains a rechargeable Nickel-Cadmium battery, which must be disposed of properly.

◗Battery should only be removed when D- Finer Shaper is to be discarded.

◗Refer to Battery Removal instruction sheet for directions on removing the rechargeable battery.

11.This Shaper is for use on human facial hair only. Do not use this Shaper for any other purpose.

12.Always store your Shaper and adaptor in a moisture-free area. Make sure the cord is disconnected from the Shaper.

SAVE THESE INSTRUCTIONS

IMPORTANT: YOUR SHAPER CONTAINS A NICKEL-CADMIUM RECHARGEABLE BATTERY. See Battery Removal instruction sheet.

approximately 10 hours

for up to 40 minutes of

cordless operation.

5Remove the adaptor from the electrical outlet and disconnect the power cord plug from the Shaper.

6When the battery is empty, recharge the appliance for 10 hours. The Shaper does not operate directly from the electrical outlet. If you want to style your facial hair when the battery is empty, charge the appliance at least 90 minutes to ensure enough power for the one styling session.

Optimize the working life of the battery

After the Shaper has been charged for the first time, do not recharge it between styling sessions. Continue using it until the battery is almost completely empty.

◗ Discharge the battery completely twice a year

by letting the motor run until it stops. Then

recharge the battery for at least 10 hours.

◗ Do not charge the appliance for more than

move it against the

direction of hair growth

(Fig. 6).

5Make well-controlled movements. Touch the hair lightly with the specialty Hi- Definition Trimmer.

NOTE: Since all hairs do not grow in the same direction, you may want to try different contouring positions (i.e., upwards, downwards, or across). Practice is best for optimum results.

For additional styles and defining tips, visit our website: www.norelco.com/d-finer.

When you have created your desired beard contour, slide the specialty Hi-Definition Trimmer back down to its original position.

 

Finishing

 

1

Finally, use the narrow

7

 

shaving mini-foil to shave

 

 

along the contour edges to

 

 

remove any stubble while

 

 

creating a smooth clean

 

1Remove the detachable shaving head by pulling it from the appliance (fig. 10).

2Remove the shaving mini- foil by pushing it out of the shaving head (fig. 11).

3Place the new shaving mini- foil carefully in the shaving head (fig. 12).

4When the shaving mini-foil is properly positioned, push it into its end position with your finger (fig. 13).

10

11

12

13

24 hours.

◗ Do not keep cord permanently plugged into

the electrical outlet.

◗ If Shaper hasn’t been used for a long period

of time, it must be recharged for a full 10

hours.

beard line (Fig. 7).

Before using mini-foil, always check mini-foil for wear or damage. If mini-foil shows signs of wear or damage, do not use shaver as injury may occur. Do not use until mini-foil has been replaced.

Replacing The Mini-foil Cutter

The mini-foil cutter is located under the detachable shaving head.

Do not switch the appliance on when replacing the mini-foil cutter.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents DAY Money Back Guarantee Important Safety InstructionsFeatures CleaningPeligro Instrucciones DE Seguridad Importantes60 Días DE Garantía DE Devolución DEL Dinero Aviso

D359, D350 specifications

Philips D350 and D359 are two standout models in the realm of cordless landline telephony, offering a combination of modern technology, user-friendly features, and robust design. These models are particularly well suited for home or small office environments, where reliability and clarity are paramount.

The Philips D350 boasts a sleek and ergonomic design, ensuring that it is comfortable to hold during longer conversations. With a bright and easy-to-read LCD display, users can quickly view caller information and navigate features with ease. The device supports up to 50 contacts in its directory, allowing for quick access to frequently called numbers.

One of the main features of the D350 is its excellent sound quality, supported by advanced digital signal processing technology. This ensures that conversations are clear and crisp, significantly reducing background noise. Additionally, the D350 offers an impressive range of wireless connectivity, with a coverage area of up to 300 meters outdoors and 50 meters indoors, allowing users the freedom to move around their homes or offices while on calls.

The Philips D359 takes things a step further by incorporating an integrated answering machine. This feature can record up to 25 minutes of messages, ensuring that users never miss important calls. With a convenient playback feature, users can easily listen to their messages directly from the handset. The D359 also includes features such as call screening and remote access, providing greater control over missed calls.

Both models feature eco-friendly technologies, including energy-saving modes and low radiation emissions, making them not only user-friendly but also environmentally conscious. They are also equipped with an easy-to-use interface, which includes a large keypad with well-spaced buttons, reducing the likelihood of misdialing.

Durability is another characteristic of these models, with a high-quality build that can withstand everyday use. The battery life is commendable, providing extended talk time and standby time, which is essential for users who rely heavily on their phones.

In summary, the Philips D350 and D359 are notable for their blend of advanced functionalities, user-friendly designs, and reliable performance. With clear sound quality, extensive battery life, and features that cater to the modern user's needs, these models represent strong choices for anyone seeking a dependable cordless phone solution.
Top Page Image Contents