6.
4Brush the inside of housing and Razor Head Assembly.
5Replace the Razor Head Assembly back on razor.
Every Two Months: Razor Heads
1Turn razor OFF and disconnect from outlet.
2 Remove Razor Head Assembly off housing unit.
3Brush the inside of the housing.
4Turn Razor Head Assembly over so that the underside is exposed.
5 Press down and turn wheel of frame counterclockwise.
6Remove the frame and brush clean.
7 Remove and clean one cutter and head at a time.
• Be careful not to mix up cutters and heads.They are a matched set and if interchanged, it will greatly affect shaving performance.