Philips 4406, 4401, 4404, 4403, 4402 manual Separate the cutter from the comb

Page 11

8Separate the cutter from the comb.

9Only brush the cutter in an upward motion. Use the short bristled side of the brush.

10Brush the slots of the razor head.

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).

11Replace the cutter and razor head in the Head Assembly.

12Repeat the process for the other two razor heads (cutters and combs).

13Replace the frame.

14Press down and turn the wheel clockwise until it locks into place.

15 Replace the Razor Head Assembly back on razor.

Image 11

Contents Corded Razor 4401/02/03/04 06/12/13/14 15/16/17LCIMPORTANT SAFETY INSTRUCTIONS DANGERSAVE THESE INSTRUCTIONS Skokie, IL 60 - DAY MONEY-BACK GUARANTEENorelco Consumer Products Company A Division of Philips Electronics North America Corporation P.O. BoxFEATURES TABLE OF CONTENTSGroove channels beard FEATURESHow the Norelco Lift and Cut Patented Shaving System Makes Close ComfortableMono Voltage 110V AC Cleaning BrushFull 2-Year Warranty Pop-Up TrimmerPUT IT TO THE TEST & SHAVING TIPS HOW TO SHAVE WITH AN ELECTRIC RAZOROnce A Week Razor CLEANINGTRIMMING To groom sideburns and moustacheEvery Two Months Razor Heads 8 Separate the cutter from the comb After Each UseTrimmer 1 Turn razor OFF 2 Push Trimmer Slide Switch up to pop-up Trimmer5 Close Trimmer by sliding Trimmer switch down RC1776 - Norelco Razor Cleaner AL80 - Norelco Razor Lubricant Replacement HeadsRazor Lubricant & Cleaners Page Page MADE IN HOLLAND FULL TWO YEAR WARRANTY

Related manuals

Manual 32 pages 23.39 Kb