Cleaning
◗Always switch Trimmer OFF before cleaning.
◗Do not use abrasive, scourers or liquids such as alcohol, benzene, bleach or acetone to clean the Trimmer.
◗Never clean, remove or replace Guide Comb Attachment with motor ON.
◗Do not apply pressure to cutters.
◗Do not touch cutters with hard objects as this may damage them.
◗Do not use while bathing, showering or immerse the Trimmer in water or other liquids as damage to Trimmer may occur.
◗Never use sharp or hard objects to clean the filter to avoid damaging it.
◗If cut hairs have accumulated in the Guide Comb area, turn Trimmer off, pull Guide Comb Attachment off Trimmer and remove hairs by shaking and/or blowing.
Hair Collection Chamber
1Switch the Trimmer off.
2Remove the ClearView Hair Collection chamber and remove the hairs by shaking or brushing them out (fig. 8).
3For extra thorough cleaning and to maintain optimal suction performance, detach the filter... (fig. 9).
4...and carefully clean the ClearView Hair Collection Chamber and the filter with the brush supplied (fig. 10).
◗When trimming extremely long, dense beards, it may be necessary to empty the Hair Collection Chamber during the trimming session in order to maintain optimal suction performance.
◗If suction performance is not as strong as usual, Hair Collection Chamber may require emptying to restore optimal performance.