
Fax speed setting
Medium (14400)
Slow (9600)
Fax speed
v.17 (14400 baud)
v.29 (9600 baud)
Cause: The Fax Speed setting might have been set too fast.
The quality of the fax I sent is poor
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•Solution 1: Increase the fax resolution
•Solution 2: Make sure the glass is clean
•Solution 3: Use the Lighter/Darker setting to darken the original when sending the fax
Solution 1: Increase the fax resolution
Solution: For the
Cause: The fax resolution setting was set to a low resolution, such as Standard. If this did not solve the issue, try the next solution.
Solution 2: Make sure the glass is clean
Solution: If you are sending a fax from the glass, make a copy to check the quality of the printout. If the quality of the printout is poor, clean the glass.
Cause: The glass of the product might have been dirty. If this did not solve the issue, try the next solution.
Solution 3: Use the Lighter/Darker setting to darken the original when sending the fax
Solution: Make a copy to check the quality of the printout. If the printout is too light, you can darken it by adjusting the Lighter/Darker setting when sending the fax.
Cause: The Lighter/Darker setting might have been set too light. If you were sending a faded, washed out, or handwritten fax, or a document with a watermark (such as a red seal or stamp), you can change the Lighter/Darker setting to send the fax darker than the original.
Solve a problem
Fax transmission is slow
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Fax troubleshooting | 125 |