Chapter 13

Solve a problem

Cause: The print carriage latch was not closed properly.

If this did not solve the issue, try the next solution.

Solution 3: Clean the electrical contacts

Solution: Clean the cartridge electrical contacts.

To clean the electrical contacts

1.Make sure the product is turned on.

2.Open the cartridge access door by lifting the blue access handles on the side of the product, until the door locks into place.

The print carriage moves to the center of the product.

NOTE: Wait until the print carriage stops moving before proceeding.

3.Locate the ink cartridge that is indicated in the error message, and then press the tab on the ink cartridge to release it from the slot.

154 Solve a problem

Page 157
Image 157
HP Premium Web - C309n manual Solution 3 Clean the electrical contacts, To clean the electrical contacts