￿A wireless 802.11 network that includes a WPS-enabled wireless router or access point.

￿A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP Photosmart on.

To connect the HP Photosmart using WiFi Protected Setup (WPS)

1.Do one of the following:

Use Push Button (PBC) method a. Select setup method.

￿Touch Setup.

￿Touch Network.

￿Touch WiFi Protected Setup.

￿Touch Push Button.

b. Set up wireless connection.

￿Touch Start.

￿Press and hold the button on WPS-enabled router or other networking device to activate WPS.

NOTE: The product begins a timer for approximately two minutes in which the corresponding button on the networking device needs to be pressed.

￿Touch OK.

c. Install software.

Use PIN method

a. Select setup method.

￿Touch Setup.

￿Touch Network.

Network setup

Add the HP Photosmart to a network

83

Page 86
Image 86
HP Premium Web - C309n manual To connect the HP Photosmart using WiFi Protected Setup WPS, Use PIN method