Chapter 9

If your computer has two phone ports, set up the HP Photosmart as described below.

Figure 9-8 Back view of the HP Photosmart

Fax

1Telephone wall jack

2"IN" phone port on your computer

3"OUT" phone port on your computer

4Telephone

5Computer with modem

6Use the phone cord supplied in the box with the HP Photosmart to connect to the "1-LINE" port

To set up the HP Photosmart on the same phone line as a computer with two phone ports

1.Remove the white plug from the port labeled 2-EXT on the back of the HP Photosmart.

2.Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the HP Photosmart.

3.Connect a phone to the "OUT" port on the back of your computer dial-up modem.

4.Using the phone cord supplied in the box with the HP Photosmart, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP Photosmart.

NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP Photosmart, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office.

62 Fax

Page 65
Image 65
HP Premium Web - C309n manual 62 Fax