4.
INDICATIONS
LED Charging Indicator Light
The green LED Charging Indicator Light will light up to indicate razor is (re)charging.
CHARGING
Battery performance is best if you recharge only when the batteries are (almost) completely empty.
Charging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.
Continuously recharging will reduce life of batteries.
If razor has not been used for at least 1 month, razor must be recharged for a full 16 hours.
Do not charge razor in pouch (model 3605X only).
1 Before charging, set Voltage Selector to desired setting. To change voltage from 115V to 230V AC, slide switch found on bottom of razor to desired voltage.
2Connect cord to razor. Plug into any 120V to 240V AC outlet. Use only the cord provided.
An adaptor plug may be necessary for cord usage in some foreign countries.
3First time charging and recharging after
5.
SHAVING
Use your new razor exclusively for 3 weeks to fully enjoy the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect, or your face may even become slightly irritated.This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you'll soon experience the full joy
of your new razor.
*Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Norelco shaving system.
Shaving with skin dry gives the best results.
1Turn razor ON. Shave against the direction of beard growth using both straight and circular movements.
2Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press razor to skin.
3Turn razor OFF.
4Put the protective razor head cap on the razor to protect razor heads.
5Replace your Norelco Double Action razor heads (model # HQ4) once a year for optimal shaving results.