8English
IMPORTANT SAFETY
INSTRUCTIONS
-- This portable light has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter the plug.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
Lighted lamp is HOT:
WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1.Keep away from combustbiles. Unplug to change bulb (lamp). Do not touch bulb (lamp).
2.Do not operate without complete bulb (lamp) enclosure in place or if lens is damaged.
3.Unplug and allow to cool before replacing bulb (lamp).
4.Bulb (lamp) gets HOT quickly! Only contact switch/plug when turning on.
5.Do not touch hot lens, guard, or enclosure.
6.Do not remain in light if skin feels warm.
7.Do not look directly at lighted lamp.
8.Keep lamp away from materials that may burn.
9.Use only with a 12V, 100 watt, GY6.35 Tungsten Halogen or smaller bulb (lamp).
10.Do not touch the bulb (lamp) at any time. Use a soft cloth. Oil from skin may damage bulb (lamp).
11.Do not operate the portable luminaire with a missing or damaged guard, lamp containment barrier, or UV filter.
SAVE THESE INSTRUCTIONS
IMPORTANT
-- Read this user manual carefully before you use the appliance and save it for future reference. -- This appliance is double insulated according to Class II (Fig. 1).
-- When using an electric appliance, basic precautions should always be followed, including the following:
Danger
-- Water and electricity are a dangerous combination. Do not use this appliance in wet surroundings (e.g. in the bathroom or near a shower or swimming pool).
-- Do not let water run into the appliance or spill water onto the appliance (Fig. 2).
Warning
-- Check if the voltage indicated on the appliance corresponds to the local voltage before you connect the appliance.
-- The appliance is suitable for voltages of 120V and 60Hz.
English 9
-- If the power cord is damaged, do not use the appliance.Visit our website: www.philips.com or call 1-866-832-4361 for assistance.
-- Always let the appliance cool down for approx. 15 minutes before you open the top cap to remove the lamp.The lamp and the metal part of the top cover become hot during use and you may burn your fingers when you touch them. (Fig. 3)
-- Close supervision is necessary when this appliance is used by, or near children or invalids. -- Children should be supervised to ensure that they do not play with the appliance.
-- This appliance is for indoor use only (Fig. 4).
Caution
-- Do not drop the appliance or expose it to heavy shocks.
-- Place the appliance on a stable, level and non-slippery surface.
-- Do not use the appliance at room temperatures lower than 50°F/10°C or higher than 95°F/35°C.
-- Make sure the vents in the top and in the bottom of the appliance remain open during use. -- Never use the appliance if the lamp housing or top cover is damaged, broken or missing.
-- To prevent possible damage to the cord, do not wrap the cord around the appliance.
-- Consult your doctor before you start using the appliance if you have suffered from or are suffering from serious depression.
-- Do not use this appliance as a means to reduce your hours of sleep.The purpose of this appliance is to help you wake up more easily. It does not diminish your need for sleep.
-- The appliance has no on/off switch.To disconnect the appliance from the power source, remove the plug from the wall outlet.
-- Use this appliance for its intended household use as described in this manual. Do not use attachments not recommended by Philips Electronics North America Corporation.
General
-- This appliance allows you to choose the light intensity level you want to wake up to (see section ‘Using the lamp’, chapter ‘Using the appliance’).
-- If you often wake up too early or with a headache, reduce the light level.
-- If you share a bedroom with someone else, this person may unintentionally wake up from the light of the appliance, even though this person is further removed from the appliance.This is the result of differences in light sensitivity between people.
FCC Information
-- This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference to radio and television reception.These rules are designed to provide reasonable protection against radio and television interference in a residential installation. However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause interference to radio or television reception (which you can determine by unplugging the unit), try to correct the interference by one or more of the following measures: Reorient the receiving antenna (that is, the antenna for the radio or television that is “receiving” the interference). Move the unit away from the equipment that is receiving interference. Plug the unit into a different wall outlet so that the unit and the equipment receiving interference are on different branch circuits. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio TV Interference Problem”.This booklet is available from the U.S. Government Printing Office, Washington, DC 20402. Please specify stock number 004-000-00345-4 when ordering copies.This equipment has been type-tested and found to comply with the specifications in Subpart J of Part 15 of FCC Rules.
