HOW to SET the Clock Manually

If you wish to disable the auto-reception feature, press the button for three seconds. The radio reception signal will disappear. The unit will not respond to radio signals.

To enable the feature again, press the button for three seconds. The radio reception signal will start blinking to initiate reception automatically.

To set the clock manually, hold [SET/MODE] for three seconds. The display will return to MODE 1, with the hour digits blinking.

Useor to select the hour. Keep pressing the button will increase or decrease the value rapidly.

Press [SET/MODE] to confirm. The minute digits will blink. Repeat the same procedure to set the minutes, then the day-of- month, month, display language, weekday and offset for the second time zone.

Note that the time and date are displayed in 24-HOUR clock and DAY-MONTH format, respectively. For display language, you can choose among English (E), German (D), French (F) and Italian (I) in order. Weekday is the usual sequence of Monday through Sunday.

For the second time zone, which is indicated by the ZONE ICON, enter the hour offset using the or buttons and the RMR182 will calculate the second time accordingly. For details, please refer to the section “Time Zone And Offset Table”.

If there is an item you do not wish to change, simply press [SET/MODE] to bypass the item.

When you are done, press [SET/MODE] to exit. The display will return to the mode last chosen.

HOW TO SET AND ARM THE ALARMS

The RMR182 has two alarms, ALARM 1 and ALARM 2. They can be invoked together or independently.

To set an alarm:

1.Press [(( • ))] once to select ALARM 1 or again to select ALARM 2. The last selected time of the alarm will be displayed. If you have never set the alarm before, the time will be displayed as 0:00.

2.Press [(( • ))] for three seconds. The hour digits will blink.

3.Enter the hour using or .

4.Press [(( • ))]. The minute digits will blink.

5.Enter the minutes using or .

6.Press [(( • ))] to exit.

The alarm ON icon [ ] for the alarm chosen will be displayed indicating the alarm set above is now armed.

You can also arm or disarm an alarm by pressing the [AL ON/OFF] button.

HOW TO STOP AN ALARM

To stop an alarm from ringing on the same day, press [((.))] or [AL ON/OFF] once. Note that the alarm is still armed and will go off at the set time the following day.

To deactivate the alarm function completely, press [AL ON/OFF ] a second time.

RMR182_EN

8/16/04, 2:58 PM