Oregon Scientific EMR899HGN Before YOU Begin, Battery and Channel Installation Remote Unit

HWall-mount holder

Supports the remote unit in wall-mounting

IRemovable table stand

For standing the remote unit on a flat surface

EN

BEFORE YOU BEGIN

To ensure proper functioning of the EMR899HGN follow this setup procedure.

For best operation:

1.Assign different channels to different remote units.

2.Insert batteries for remote units before doing so for the main unit (see instructions for battery installation).

3.Place the main unit as close as possible next to the remote unit, reset the main unit after installing batteries. This will ensure easier synchronization between the transmission and reception of signals.

4.Position the remote unit and main unit within effective transmis- sion range, which, in usual circumstances, is 20 to 30 meters.

Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various set-ups for best result.

Though the remote units are weather proof, they should be placed away from direct sunlight, rain or snow.

BATTERY AND CHANNEL

INSTALLATION: REMOTE UNIT

The remote thermo-hygro sensor unit uses two (2) UM-4 or “AAA” size alkaline batteries.

3

EMR899_EN_R3 3 8/30/04, 11:36 AM