Oregon Scientific EMR899HGN user manual Battery Installation Main Unit

EN	Follow these steps to install / replace batteries:
	1.	Remove the screws on the battery compartment.
	2.	Select the channel number on the CHANNEL slide switch.
	3.	Select the temperature display unit on the °C/°F slide switch.

4.Insert the batteries strictly according to the polarities shown therein.

5.Replace the battery compartment door and secure its screws.

Replace the batteries when the low-battery indicator of the particular channel lights up on the main unit. (Repeat the steps described in section “BEFORE YOU BEGIN”)

Note that once a channel is assigned to a remote unit, you can only change it by removing the batteries or resetting the unit.

BATTERY INSTALLATION: MAIN UNIT

The main unit uses two (2) UM-3 or “AA” size alkaline batteries.

Follow these steps to install / replace batteries:

1.Slide open the battery compartment door.

2.Insert the batteries strictly according to the polarities shown therein.

3.Replace the battery compartment door.

Replace the batteries when the low-battery indicator of the indoors temperature lights up. (Repeat the steps described in section

“BEFORE YOU BEGIN”)

If not disposed of properly, batteries can be harmful. Protect the environment by taking exhausted batteries ot authorized disposal stations.

4

EMR899_EN_R3 4 8/30/04, 11:36 AM