The
Mounting
This unit needs at least 2 1/2" (64 mm) of space to mount on any flat panel or dash. To install the unit, also make certain there is at least 3 3/4" (95 mm) from the front of the dash to any obstruction behind the dash. Check to be sure there is room to route the power and sensor cables. The maximum usable dash thickness is 1 1/8" (28.5 mm).
234567
3 3/4" minimum
clearance
SCREW
DASH
21/2"
(64 mm)
(SQUARE
BEZEL)
1
TIGHTEN
THESE
SCREWS
2 1/8" (54 mm) HOLE
2 3/8" ( 60 mm)
(ROUND
BEZEL)