Fluke 561 user manual Features

Page 7

Infrared Thermometer

Features

AISVOEMIDITETXEPDOFSRUORME T- HLAISSAEPRERRATDUIARETION
CAUTION	INTO BEAM
LASER RADIATION - DO NOT STARE
OCLUATSPUST2<(II1)mLAWSEWRAPVREOLDEUNCGTTH 630 - 670nm
COMPLIES WITH FDA 21CFR
1C0O4M0.P1L0IEASNDW1IT0H40IE.1C1 60825

AVOID EXPOSURE - LASER RADIATION

IS EMITTED FROM THIS APERTURE

CAUTION

LASER RADIATION - DO NOT STARE INTO BEAM

OUTPUT < 1mW WAVELENGTH 630 - 670nm

CLASS 2 (II) LASER PRODUCT

COMPLIES WITH FDA 21CFR 1040.10 AND 1040.11 COMPLIES WITH IEC 60825

efh010f.eps

Figure 1. Symbols and Safety Markings

Features

The Thermometer includes:

•Single-spot Laser Sighting

•Backlit Display

•Hard Case

•Current Temperature Plus MIN, MAX, DIF Temperature Displays

•Easy Emissivity Selector

•Type-K Thermocouple, Velcro Pipe Probe

•Two AA Batteries

Thermometer features are shown in Figure 2.

3

Image 7

Contents HVACPro Limited Warranty and Limitation of Liability Table of Contents HVACPro Contacting Fluke IntroductionWWarning Safety InformationFeatures FeaturesDisplay When the battery is low, B appears on the displayButtons and Connector Buttons and ConnectorDistance and Spot Size How the Thermometer WorksOperating the Thermometer Locating a Hot or Cold SpotField of View Operating the ThermometerEmissivity Switching Between C and F XWWarning Using the Contact Temperature ProbeTypical Measurements Measuring Dewpoint TemperatureTypical Measurements Testing Insulated Return DuctsScanning Walls for Air Leaks or Insulation Deficiencies Testing Electrical Connections Testing Contactors StartersTesting Enclosed Relays Testing Fuses and Buss ConnectionsTesting Belts and Sheaves Testing BearingsChecking Hydronic Radiant Heat Applications Testing Water Heater Insulation Testing Radiant Heat ApplicationsTesting Steam Traps Verifying Thermostat/Room Sensor Accuracy Superheat is a critical temperature CE Certification MaintenanceTroubleshooting MaintenanceInfrared Specifications