Monarch Monarch 314 Datalogging Humidity Temperature Meter Declaration of Conformity

DECLARATION OF CONFORMITY

	Monarch Instrument
	Division of Monarch International Inc.
	15 Columbia Drive, Amherst NH 03031 USA
	declares that the product:
Name:	Humidity Temperature Meter
Model:	Monarch 314

to which this declaration relates is in conformity with the following standards:

EMC: EN55011/1991

EN50081-1/1992

EN50082-1/1992 / IEC 801

and therefore conforms in accordance with 89/336/EEC-EMC Directive. The testing of this product was performed by GesTek EMC Lab. in January of 2000. (Ref. No. 99C049E).

2nd February 2000

Importer (Amherst, NH) Alan Woolfson, VP Engineering (Authorized Signature)

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER

Table of Contents

Section			Page
1.0	Introduction		1
2.0	Specifications		1
3.0	Symbol Definitions and Feature Locations		2
4.0	Operating Instructions		3
	4.1	Preparation for Measurement	3
	4.2	Power	3
	4.3	Humidity and Temperature (T1) Measurement	3
	4.4	Selecting the Temperature Scale	3
	4.5	Data-Hold Operation	3
	4.6	Clock Setup	3
	4.7	Time Function	3
	4.8	Recording Interval Setup	4
	4.9	Recording Data	4
	4.10	MAX/MIN Operation	4
	4.11	Auto Power Off	4
	4.12	Low Battery Condition	4
	4.13	Digital Output	4
	Appendix: Thermocouple Probe Specifications		5
5.0	Calibration Procedure		5
	5.1	Humidity Calibration	5
	5.2	T1 Temperature Calibration	5
	5.3	Notes on Humidity and Temperature Calibration	6

6.0Setup TestLink (Humidity DataLogger) – RS232 Interface

	Software		7
7.0	Running TestLink		7
	7.1	Open TestLink	7
	7.2	Real Time Tabular and Real Time Graph	7
	7.3	DataLogger	8