Monarch 1071-8041-210 Calibration Procedure, Model Range Tolerances Description, TP-K01

Page 8

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER

Appendix: Thermocouple Probe Specifications

Model

Range

Tolerances

Description

TP-K01

-50°C to 200°C

±2.2°C or ±0.75%

Teflon insulation. Maximum insulation

Wire probe

-58°F to 392°F

±3.6°F or ±0.75%

temperature: 260°C (500°F)

TP-K01:

Probe for general condition measurements, especially for complex and hard to reach places.

5.0Calibration Procedure

5.1Humidity Calibration

1.Turn the unit off. Press and hold the MAX MIN, HOLD and REC buttons. While these three buttons are pressed, turn the power on. Release these buttons and all the segments on the display will flash.

2.Within 3 seconds of releasing these buttons, press the °C/°F and TIME buttons simultaneously to enter the calibration mode, or the instrument will revert to the normal operating mode.

3.Upon entering the calibration mode, the humidity reading will flash, and ‘CAL1’ will appear on the second display.

4.Insert the humidity probe into the standard humidity cavity of 32.8% RH@25°C. Allow the system to stabilize for 20 minutes, and then press the MAX MIN button to create the calibration data. If the instrument recognizes the value is out of tolerance, it will sound 2 beeps and remain in the ‘CAL1’ mode. If the instrument recognizes the value is within tolerance, new calibration data is created and the instrument will advance into the ‘CAL2’ mode, as indicated on the second display.

5.Insert the humidity probe into the standard humidity cavity of 75.3% RH@25°C. Again allow the system to stabilize for 20 minutes, and then press the MAX MIN button to create the calibration data. If the instrument recognizes the value is out of tolerance, it will sound 2 beeps and remain in the ‘CAL2’ mode. If the instrument recognizes the value is within tolerance, new calibration data will be written into the memory and the calibration is complete.

5.2T1 Temperature Calibration

1.Turn the unit off. Press and hold the MAX MIN, HOLD and REC buttons. While these three buttons are pressed, turn the power on. Release these buttons and all the segments on the display will flash.

2.Within 3 seconds of releasing these buttons, press the °C/°F and HOLD buttons simultaneously to enter the calibration mode, or the instrument will revert to normal operating mode.

3.Upon entering the calibration mode, the temperature reading will flash and ‘CAL1’ will appear on the second display.

4.Insert the probe into a temperature-controlled chamber at 0°C (32°F) and allow the system to stabilize for 20 minutes. Press the MAX MIN button to create the calibration data. If the instrument recognizes the value is out of tolerance, it will sound 2 beeps and remain in the ‘CAL1’ mode. If the instrument recognizes the value is within tolerance, new calibration data is created and the instrument will advance into the ‘CAL2’ mode, as indicated on the second display.

5.Insert the probe into a temperature-controlled chamber at 40°C (104°F) and again allow the system to stabilize for 20 minutes. Press the MAX MIN button to create the calibration data. If the instrument recognizes the value is out of tolerance, it will sound 2 beeps and remain in the ‘CAL2’ mode. If the instrument recognizes the value is within tolerance, new calibration data will be written into the memory and the calibration is complete.

5

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER

5.3Notes on Humidity and Temperature Calibrations

1.While performing the humidity calibration, the environment should be maintained at stable conditions (i.e. constant temperature and constant humidity) to optimize the accuracy.

2.During either calibration, pressing the button at any time will return the instrument to the normal operating mode, and no calibration data will be changed.

3.To restore factory default calibration values, press the HOLD and REC buttons simultaneously at any time while in the calibration mode.

4.Whenever the probe is inserted into a standard humidity cavity or temperature-controlled chamber, always allow at least 20 minutes to ensure ambient conditions have stabilized.

5.Always begin the humidity calibration process with the 32.8% RH@25°C standard cavity and the temperature calibration process with the 0°C (32°F) temperature-controlled chamber. For maximum efficiency, insert the probe into the conditioned environment 20 minutes before applying power to the instrument and starting the calibration process.

6.During the calibration, all displayed readings are based on pre-process calibration data.

7.The ‘Auto Power Off’ function is disabled during calibration, but is automatically restored upon completion.

8. During the calibration, the temperature is fixed on the °F scale and it is not selectable.

6

Page 7 Page 8
Image 8
Page 7 Page 8
Contents Datalogging Humidity Temperature Meter MonarchSafeguards and Precautions Table of Contents Declaration of ConformitySpecifications IntroductionNegative temperature indication Feature LocationsRelative Humidity indication Indicates the value below is month and dayOperating Instructions Setup TestLink Humidity DataLogger RS232 Interface Software Running TestLinkCalibration Procedure T1 Temperature CalibrationModel Range Tolerances Description TP-K01

1071-8041-210, Monarch 314 Datalogging Humidity Temperature Meter specifications

The Monarch Monarch 314 Datalogging Humidity Temperature Meter, model number 1071-8041-210, is a cutting-edge instrument designed for professionals seeking precise environmental monitoring. This multi-functional meter combines advanced technologies to measure both humidity and temperature accurately, making it an essential tool for various industries including HVAC, food storage, pharmaceuticals, and agricultural applications.

One of the standout features of the Monarch 314 is its dual-functionality. It measures relative humidity in a range from 0 to 100% with an impressive accuracy of ±2% RH. Simultaneously, it records ambient temperature across an extensive range, from -40°C to 125°C (-40°F to 257°F). This broad functionality allows users to gain comprehensive insights into environmental conditions critical for maintaining product quality and safety.

The robust design of the Monarch 314 includes a user-friendly interface equipped with a large, backlit LCD screen that displays readings clearly. The data logging capability allows the device to store thousands of readings over time, making it convenient for long-term monitoring. Readings can be easily retrieved and analyzed via a USB interface, where users can connect the meter to a computer for further data processing.

In addition, the device is designed to be highly portable with a lightweight structure and a protective case, making it easy to carry around to various locations. Its compact design doesn't compromise on durability; it is capable of withstanding daily wear and tear in challenging environments.

The Monarch 314 includes advanced calibration capabilities, ensuring that users can maintain accuracy over time. This feature is critical for industries requiring strict compliance with regulatory standards, as it allows for easy recalibration whenever necessary.

Furthermore, the meter is equipped with programmable alarms, which alert users when humidity or temperature readings exceed predetermined thresholds. This proactive functionality helps in preventing costly product spoilage and enhances overall operational efficiency.

In conclusion, the Monarch Monarch 314 Datalogging Humidity Temperature Meter, 1071-8041-210, is an exemplary tool for monitoring environmental conditions with its comprehensive features, advanced technologies, and user-friendly design. Its reliability and accuracy make it a valuable asset for professionals in various fields, ensuring optimal conditions for their products and processes.
Top Page Image Contents