3Using the Infrared Thermometer/Transmitter
3.5.10 Erasing the Temperature Data from Memory
The user can erase all 100 temperature data points in memory at any time by using the following procedure:
1.With power applied to the unit, place the SLEEP/ON switch to the ON position.
2.Press the key. The icon will appear.
3.Place the SLEEP/ON switch to the SLEEP position.
4.Press the key and then the key in rapid sequence.
NOTE
If the icon disappeared, repeat
Steps 1 and 2.
The display freezes momentarily, and a beep sounds for about 1 second. Now the memory is cleared. The thermometer reverts to real time mode.
NOTE
Erasing the temperature data does not erase or reset your